Video installation instructions can be found here and if there are any issues we can always be contacted via email at support@bigupsup.com

Big Up SUP has developed an adapter plate for most inflatable paddle boards which can be found here

We refer to them as 'buffer pads' and they are included in the tool kit. They are designed to decouple the fin from the board and assist with any extreme board concave. Correct orientation can be found here.

T-19 is 1 lb 8 oz.
T-16 is 1 lb 3 oz.

T-19 has 105 in2 of surface area.
T-16 has 87 in2 of surface area.

A variety of different color anodizing will be available in the near future.

Absolutely. The T-series fin has more surface area than a standard fin. The more surface area in the water, the better your board will track.

We will repair or replace any part or finish that proves to be defective in material and/or workmanship under
normal installation, use, and service. Please note: warranties do not cover normal “wear and tear.”

Yes. You will need to use a bolt that is 1 1/8" with an 8-32 thread.

Sign up for our Newsletter